40% Bronze Filled Teflon PTFE Bearing Strip

Style KXT PG120 40% Bronze Filled Teflon PTFE Bearing Strip

40% Bronze Filled Teflon PTFE Bearing Strip owing to the low friction of fluorocarbon resin (PTFE), corrosion resistance, thermal stability and other excellent properties, has been widely used in friction, sealing parts, especially in the corrosive medium, and the problem is often difficult to be solved by general metal and other non-metallic materials. The elasticity and toughness of fluorocarbon resin to become excellent sealing material, especially when it is further through a variety of filling modification and some aromatic resin composite plastic alloy, can obtain the higher bearing capacity, thermal mechanical stability, abrasion resistance and the limit PV value.

40% Bronze Filled Teflon PTFE Bearing Strip plays a guiding role, in order to prevent the cylinder and piston rod wear, highly wear-resistant, low friction, heat resistant, resistant to chemical corrosion, allow any foreign body is embedded in the guide wear ring, to prevent the particles on the cylinder and seal loss, can absorb vibration performance, and has excellent wear resistance and good dry dynamic characteristics

Material: PTFE + 40% Bronze powder

Temperature: -60°C to +150°C

Elongation at break: ≥ %150

Standard denstity: 2.4-3.25

Tensil strength: ≥15 mpa

Advantages

• Excellent wear resistance and good performance of the dry line

• Compatible with most of the fluids in contact

• Low friction of fluorocarbon resin (PTFE)

• Easy assembly, low friction coefficient.

• Obtain the higher bearing capacity

• Very good temperature resistance

• Resistant to chemical corrosion

• Good corrosion resistance

• Durability usage

• Dry use

Application

• Piston and rod bearing application

• Hydraulic cylinder

• Pneumatics

• Press.,etc