Kammprofile Gasket with Integral Outer Ring
Style KXT1130 Kammprofile Gasket with Integral Outer Ring
Kammprofile gasket have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our Kammprofile gaskets can be found in conventional power plants as well as in the primary circuit of nuclear power plants. In nuclear power plants, they are used e.g. as a heat exchanger gasket, as a valve cap gasket or as a manhole cover gasket on steam generators or pressurisers
Kammprofile Gasket with Integral Outer Ring
Kammprofile Gasket with Integral Outer Ring is a slight variation than Kammprofile Gasket with loose Outer Ring. The integral outer locating ring is replaced by a loose fitting, independent, thinner locating ring. The loose fitting ring allows for expansion and contraction without excessive stress being induced in the solid metal core. Depending on centering ring material and thickness, Kammprofile Gasket with Integral outer ring may be more economical than Kammprofile Gasket with loose Outer Ring. TKammprofile Gasket with Integral Outer Ring is recommended for use on standard flat face and raised face flange assemblies.
Advantages
Outstanding sealing characteristics at a wide range of seating stress levels
The gasket will not damage the flange surface and can be easily removed
High resistance to severe temperature & pressure variation
The gasket cores are reusable reducing cost usage
Extreme temperature and chemical resistance
Low initial sealing stress for installation
Reliable sealing performance
Can be reused
Application
High pressure and high temperature applications
Heat Exchanger and vessel applications
Small flange widths & damaged flange
Suitable for a range of chemicals
Can be used for narrow flanges
Petrochemical industry
Coolers., etc
Materials for metal Core
| Core Materials | Max Temperature | Core Materials | Max Temperature | Core Thicknes |
| SS 316L | 550 oC | Inconel 625 | 450 oC | 2mm, 3mm, 4mm |
| SS 304 | 550 oC | Incoloy 825 | 450 oC | |
| Monel 400 | 600 oC | Hastelloy B-2 | 450 oC | |
| Nickel 200 | 600 oC | Hastelloy C 276 | 450 oC | |
| Inconel 600 | 900 oC | Titanium | 350 oC | |
| Face Materials | Max Temp | Face Materials | Max Temp | |
| Graphite | 550 oC | PTFE | 260 oC |
Standard size
Thickness: 3.5mm, 4.0mm, 4.5mm, 5.0mm We also provides other sizes, for details please contact us or send your inquiry directly to us
